Sonic – Sonic Compétition

516.53

The “SONIX” was developed in partnership with the best team of VR4 and world champions, the Belgians “Hayabusa”, to create this model which, today is without any doubt a top-of-range product in terms of quality and performance. Thank you also to Pete Allum who gave his opinion and comments! This suit was developed keeping in mind 2 principal matters: Performance and Comfort. We didn’t hesitate to mix these , so that each part of the body can perform well and be free in movements.

Available on backorder

  • Configure your suit

    *Stitching Color
    *Sonic logo color - Main
    *Sonic logo color - Secondary
    *Select fit
    *M1 Outside leg (cm)
    Keep your shoes on Stand with your feet on shoulder width Measure from the top of the hip bone (you can use the waistband top as a marker) on the side of the leg keeping the measuring tape beside the legs, down to the floor
    *M1A Outside leg to knee (cm)
    Measure from the top of the hip bone (you can Use the waistband top as a marker) on the side of the leg keeping the measuring tape beside the legs, down to the center of the kneecap
    *M2 Inside leg (cm)
    Stay straight Hold the measuring tape like in figure B Measure from the crotch to the floor (center legs) with shoes on Care about not to have a loose crotch
    *M2A Inside leg to knee (cm)
    Stay straight II Hold the measuring tape like in figure B Measure from the crotch to the kneecap center keeping the measuring tape beside the leg Care about not to have a loose crotch
    *M3 Thigh (cm)
    Empty your pockets Measure around the thigh at the widest point (usually as high as you can go without it getting embarrassing) This is a precise measurement and should be taken just below the crotch Make sure that the tape is not restricted
    *M3A Knee (cm)
    Keep your leg bended like in M3 and measure comfortably around your knee at the widest point Make sure that the tape is not restricted
    *M4 Seat (cm)
    Measure around your bum at the widest point Make sure your pockets are empty and the tape is not restricted Get a couple of measurements to be sure to find the widest point
    *M5 Waist (cm)
    Measure horizontally around your waist, the smallest circumference of your belly (normally at the height of the belly button)
    *M6 Around the chest (cm)
    Initially lift up your arms Place the measure tape around the chest at nipple level, under the armpits and over your shoulder blades Put your arms down 104 You should only just be able to feel the tape on your chest Take a breath
    *M7 Body length (cm)
    Keep straight Top Measure vertically from your shoulder (tee shirt stitching, near the collar) to the top of the hip bone
    *M8 Around all the body (cm)
    Measure vertically from the hole of your throat, passing by your chest, your belly, between your legs and go back up along your spine and stop to the first cervical (collar) This measurement is extremely important to ensure a good fit Take your time to do it accurately Be sure not to have a loose crotch On the lower back, care about having the tape Snug to the body
    *M9 Neck (cm)
    Measure around your neck at about the level of your shirt collar, Crossing the end of the tape as av shape like in figure
    *M10 Arm length (cm)
    Keep straight Arm straight on the side parallel to the floor Splne Measure from the center of the spine to the wrist bone keeping the measure tape snug to the arm
    *M11 Arm length bended (a-c) (cm)
    You have to take three measurements: A-C (Figure 3 + figured Same as MIO but bending your elbow 90° in front of you A-B (Figure 3) Like the previous, but from the center of the splne to the middle of the elbow B-C (Figure D Like the previous, but from the middle of the elbow to the wrist bone Important :(A-B) + (B-C) = (A-C)
    *M11 Arm length bended (a-b) (cm)
    You have to take three measurements: A-C (Figure 3 + figured Same as MIO but bending your elbow 90° in front of you A-B (Figure 3) Like the previous, but from the center of the splne to the middle of the elbow B-C (Figure D Like the previous, but from the middle of the elbow to the wrist bone Important :(A-B) + (B-C) = (A-C)
    *M11 Arm length bended (b-c) (cm)
    You have to take three measurements: A-C (Figure 3 + figured Same as MIO but bending your elbow 90° in front of you A-B (Figure 3) Like the previous, but from the center of the splne to the middle of the elbow B-C (Figure D Like the previous, but from the middle of the elbow to the wrist bone Important :(A-B) + (B-C) = (A-C)
    *M12 Biceps (cm)
    Measure around the biceps under tension
    *M12A Elbow (cm)
    Measure around the elbow with the arm slightly bended passing from the middle of the elbow bone
    *M13 Wrist (cm)
    Measure around the wrist
    *European size shoes
    Measure around the wrist
    • 20.66 €
    • 16.53 €
    • 16.53 €
    • 16.53 €
    • 20.66 €
    • 16.53 €
    • 16.53 €
    • 16.53 €
    • 24.79 €
    • 16.53 €
    • 37.19 €
    • 16.53 €
    * 
    *Weight (kg)
    Easy peasy... Your weight....
    *Height (cm)
    Easy peasy... Your height....
    • 65.29 €
    • 23.97 €
    To customize your colors CLICK HERE
    When completed, save your image and upload the file below
    • (max file size 2 MB)
To improve the speed of the flight, shoulders, arms, and front of the body up to the  knees are made out of Nylon (windproof fabrics that allows wind gliding). The fore-arms are made out of Lycra for more flexibility and to penetrate the Air. The lower front legs are made out of Cordura for more resistance and more response to their action. The collar is made out of Lycra. The back, body-side and crotch are made out of Lycra for more flexibility. This suit has reinforcements out of Cordura on the most vulnerable parts: the knees and the bottom. The zip is windproof, strongly advised for the intense use in the windtunnel. The inside pocket is added for practical purposes. This suit presents double grips on arms and on legs in the following sizes: 30mm of diameter on the arms and 40mm on the legs.
Front and Upper arms in NYLON, Back and body side in LYCRA, Small part in POLY-COTTON on the upper back for the resistance, Fore arms in LYCRA with reinforcement in WINDSTOPPER on the elbow, Compétition Grips (double arms and legs) in Cordura, Different Inside Colour Grips, NEW A-BOOTIES (made in CORDURA 1000, preformed with sole reinforced, adjustable), Foam knees, All Front Legs and Bum in Cordura, Zipper windproof. Inside pocket. All stitching is double.

Additional information

Brand

Sonic

Reviews

There are no reviews yet.

Be the first to review “Sonic – Sonic Compétition”

Your email address will not be published. Required fields are marked *